Configuration
Topcon HiPer+ Operator’s Manual
2-32
Figure 2-25. Manual Mode – Command Responses
TIP
Save this set of commands to a script file and
load this file later to the receiver with a single
operation. To create a script file, see
Appendix A.
4. Click Disconnect (Figure 2-25).
5. Run the PDL Radio Configuration Program
(pdlconf.exe) from Pacific Crest (Figure 2-26 on
page 2-33).
Make sure you have the latest version (2.20 or higher).
Upgrades for this software are available on the Pacific
Crest website (www.paccrst.com/download/
upgrade.htm).
To Next Page
Loading...
