Connecting the HiPer+ and a Computer
1-866-4TOPCON www.topconpositioning.com
2-5
Connecting the HiPer+ and a Computer
To configure, manage files, or maintain the HiPer+, you need to
connect the receiver and a computer using:
• The HiPer+, a Bluetooth-enabled external device (computer),
and PC-CDU.
OR
• The HiPer+, an RS232 cable, a computer, and PC-CDU.
OR
• The HiPer+, a USB cable, a computer with the TPS USB
driver installed, and PC-CDU.
Once you have established a connection between the receiver and
the computer (whether through Bluetooth wireless technology,
the RS232 cable, or the USB cable), you will be able to:
• Configure the receiver and its components
• Send commands to the receiver
• Download files from the receiver’s memory
• Load new firmware, OAFs, and configuration files to a
receiver
Establishing a Wireless Connection
The HiPer+ receiver contains Bluetooth wireless technology
that allows file transfer and synchronization between the
receiver and any other external device that supports
Bluetooth wireless technology; for example, an IPAQ, or a
computer with USB-to-Bluetooth adapter or PCMCA-to-
Bluetooth adapter installed.
NOTICE
Changing the receiver’s Port B default settings
will affect the Bluetooth link. The default
To Next Page
Loading...
