Appendix A
1-866-4TOPCON www.topconpositioning.com
A-1
Creating Scripts
Script files allow you to save manual commands into one file.
You can then load this single script instead of typing each
individual command. Use the following procedure to create script
files.
TIP
For more information on script files, see the
PC-CDU User’s Manual.
1. Connect your receiver and computer. See “Connecting the
HiPer+ and a Computer” on page 2-5 for this procedure.
2. Start PC-CDU.
3. Click on File->Manual Mode.
4. Click Edit script.
5. Navigate to the folder in which you want to save the script
file.
6. Type the file name. All files have a .jpc extension.
For example, Daisy_38400.jpc to enable the daisy chain and
Daisy_Off.jpc to disable the daisy chain.
7. Click Yes to create the file.
To Next Page
Loading...
