Universal Robots UR16e

7.6. Single Step in a Program
Description Single Step allows the current program to be exectued one node at a time,
when the robot is in Manual mode.
(SeeOperational modeon page127).
This is useful when you are checking your program for errors.
Single Step Single Step allows the selected program node to run, then pauses at the
beginning of a new node.
Single Step can only be used when the current program is paused.
If you want to use Single Step on a specific node, the node must also
support Breakpoints.
UR16e 186 User Manual
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.