Power boost function
The power boost is designed to increase dipper
arm / bucket forces, and lifting capacities. When
digging in P, H or G modes in extremely hard
digging conditions, it is recommended to press the
power boost button before starting the digging
cycle.
Digging force will be increased for 9 seconds, which
is sufficient time for the operator to load the bucket.
After the 9-second period, the power boost is turned
off automatically.
The power boost indicator is shown on the indicator
screen of IC (Instrument Cluster) whenever it is
activated. In F-mode, the power boost is activated
continuously for maximum lifting capacity.
AC
CLIMATE
FLOW
200 l
15:56
G
I
F
H
P
1600 rpm
FF
V1134892
Indicator for power boost
98
Other controls
Controls
To Next Page
Loading...
