Timer positions T2 and T3 can be configured in the
same way.
NOTE!
To edit an existing timer, first select the timer and
then press the operating button to switch to
configuration mode. Then carry out the steps as
described above.
Deactivate timer
To deactivate a timer position, first select the timer
with the operating button. Press once and with OFF
flashing, press the operating button again. All
operating settings of the timer remain saved.
NOTE!
When a weekday range has been processed, the
time position has to be reactivated for the following
week.
Other controls
Operator comfort
159
To Next Page
Loading...
