Volvo EC140E - Page 404

EC140E L without dozer
blade
H
5 ft 10 ft 15 ft 20 ft 25 ft Max. Reach
Max.
Ib Ib Ib Ib Ib Ib Ib Ib Ib Ib Ib Ib ft
Boom: 4.6 m (15’ 1”)
Dipper arm: 2.1 m (6’ 11”)
Shoe: 600 mm (24”)
Counterweight: 2450 kg
(5400 Ib)
20 ft - - - - *7470 *7470 - - - - *7730 *7730 15.77
15 ft - - - - *7600 *7600 - - - - *7850 5820 19.49
10 ft - - *13270 *13270 *9380 8440 *8210 5500 - - 7530 4940 21.42
5 ft - - - - *11650 7990 8200 5330 - - 7100 4630 22.04
0 ft - - *12670 *12670 12340 7690 8050 5200 - - 7280 4720 21.46
-5 ft *11310 *11310 *20480 13880 12240 7610 - - - - 8280 5330 19.59
-10 ft - - *17740 14150 *11710 7770 - - - - *10660 7160 15.95
Boom: 4.6 m (15’ 1”)
Dipper arm: 2.5 m (8’ 2”)
Shoe: 600 mm (24”)
Counterweight: 2450 kg
(5400 Ib)
20 ft - - - - *6350 *6350 - - - - *7080 7010 17.49
15 ft - - - - *6740 *6740 *7080 5660 - - *7000 5250 20.90
10 ft - - *11370 *11370 *8570 8520 *7630 5530 - - 6890 4520 22.70
5 ft - - *16030 14450 *10980 8020 8200 5330 - - 6530 4260 23.28
0 ft - - *13890 13820 12320 7670 8020 5160 - - 6670 4320 22.74
-5 ft *10250 *10250 *20840 13740 12170 7530 7950 5100 - - 7440 4790 20.99
-10 ft *20220 *20220 *18770 13940 12260 7610 - - - - 9630 6130 17.66
Boom: 4.6 m (15’ 1”)
Dipper arm: 3.0 m (9’ 10”)
Shoe: 600 mm (24”)
Counterweight: 2450 kg
(5400 Ib)
20 ft - - - - - - - - - - *6250 5890 19.57
15 ft - - - - - - *6140 5710 - - *5830 4610 22.66
10 ft - - - - *7460 *7460 *6870 5540 - - *5800 4030 24.33
5 ft - - *15710 14710 *10010 8060 *8020 5300 - - 5870 3800 24.87
0 ft - - *15160 13760 *12180 7610 7950 5090 - - 5960 3840 24.37
-5 ft *8970 *8970 *20130 13520 12040 7400 7830 4980 - - 6540 4190 22.74
-10 ft *16640 *16640 *19640 13630 12050 7410 - - - - 8060 5140 19.72
-15 ft - - *15330 14100 - - - - - - *9920 8210 14.38
: Along undercarriage, : Across undercarriage, H : Lifting hook related to ground
level
1. Machine in "Fine Mode-F" (Power Boost), for lifting capacities.
2. The above loads are in compliance with SAE and ISO Hydraulic Excavator Lift Capacity
Standards.
3. Rated loads do not exceed 87% of hydraulic lifting capacity or 75% of tipping load.
4. Rated loads marked with an asterisk ( * ) are limited by hydraulic capacity rather than
tipping load.
402
Specifications
Lifting capacities