X3 response mode (optional equipment): This
informs the operator which X3 response mode
is selected at the moment. It also allows to
select a response mode from 3 different modes.
The operator can select a X3 response mode
from the three modes with the arrow buttons.
When pressing the SELECT button, the marked
response mode is set. The screen reverts to the
former screen displaying the name of the newly
selected item.
- Active
- Normal
- Soft
The operator can adjust the movement
sensitivity of attachments when operating the
levers. "Active" mode is the most sensitive.
3
Electrical system
Voltage: This shows the measured value of
voltage of the battery. When the bar graph is
green, the value is OK, within normal operation
range. When the bar graph is red, the value is
abnormal.
4
Vehicle information
Model: This shows the machine's model name.
Serial number: This shows the machine's serial
number.
Work timer: This shows the counted work time.
- Reset work timer: Work time can be reset by
pressing the SELECT button when the "Work
timer" value is highlighted. Press ESC button
to "Cancel" or SELECT button to "Yes".
V1137870
Hydraulics
Active
X3 response mode
X3 response mode
Active
Normal
Soft
V1137873
Electrical system
Voltage
Min Max
V1137874
Vehicle information
Serial number
XXXXXX
Model
XXXXXX
V1140744
Vehicle information
Work timer
37h 43min
Work timer
37h 43min
Reset work timer
Reset work timer?
Yes
Instrument panels
Display unit
49
To Next Page
Loading...
