Chapter 4 Tools
Utilities
WCDMA Options Version 6.20
125
Power — This field shows the average power drawn from the simulated battery,
measured in mW. It is calculated from the selected supply voltage and the
measured current.
Current — The Current Measurement Option measures the current that the
mobile draws from the MS Power Supply outlet. The result is averaged over one
TDMA frame and displayed in mA.
Peak c. — This field indicates the maximum current that has been detected
during the last TDMA frame. The peak current result is shown in mA.
Changing the RF parameters
While measuring the current consumption, you can also switch the RF channel
or the transmitted RF power to evaluate the current consumption under different
parameter settings.
Use the input fields TCH to change to a different channel.
Use the MS scroll field to change the transmit power level.
To Next Page
Loading...
