Chapter 7 SCPI
SCPI command errors
256 WCDMA Options Version 6.20
Error Code Meaning
61 QNX semaphore error. The operating system of the 4400
encountered a flag communication error.
62 TMSG QNX send error.
63 TMSG QNX sync error.
64 Internal communication error.
65 Unknown message received.
66 GPIB cannot be initialized.
67 This command is invalid.
68 Internal error of the task state system.
69 Error of the GPIB system.
70 QNX proxy error.
71 Process coordination error.
72 Message sent to the GPIB system is not understood there.
75 Error within the error message system.
78 Language expression invalid.
80 Name attachment error.
81 Proxy attachment error.
82 Proxy detach error.
83 Timer attachment error.
85 Timer delete error.
86 Parameter can not be set.
87 INI file error.
88 The file selected was not found.
89 DSP setup error.
100 Command error.
101 Invalid character.
102 Syntax error.
103 Invalid separator.
104 Data type error.
108 Parameter not allowed.
109 Parameter missing.
111 Header separator error.
112 Program mnemonic too long.
113 Undefined header.
To Next Page
Loading...
