Chapter 7 SCPI
SCPI command errors
WCDMA Options Version 6.20
257
114 Header suffix out of range.
121 Invalid character within a number.
123 Exponent too large.
128 Numeric data not allowed in this context.
131 Invalid suffix.
134 Suffix too long.
138 No suffix allowed in this context.
141 Invalid character data.
144 Character data too long.
158 No string allowed in this context.
160 Block data error.
168 No block data allowed in this context.
200 General execution error.
201 Multislot not active.
202 The external synchronization frequency is not within the
ranges specified.
203 External synchronization changed during remote operation.
204 The operation is not possible in the current state of the
4400.
221 Settings of the 4400 lead to a conflict.
222 Data out of range.
225 No communication system running.
226 Timeout occurred while waiting for an uplink message to
arrive from the mobile.
227 Layers 2/3 failed. Communication could not be established
due to problems on the layer 2 and/or layer 3 level.
228 Mobile can not work in the enhanced frequency range.
229 No call release while an SMS is in progress.
230 Generator/Analyzer not running.
231 System running – no system expected.
250 Mass storage error.
253 Corrupt media.
256 File name not found.
272 Macro execution error.
280 Program error.
310 System error.
To Next Page
Loading...
