EasyManua.ls Logo

WILLTEK 4403 - Page 294

WILLTEK 4403
484 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A SCPI Command Reference
SYSTem subsystem
272 WCDMA Options Version 6.20
:SYSTem:COMMunicate:SERA:BAUD
:SYSTem:KEYBoard
:SYSTem:DATE
Example
:SYST:COMM:SERA:PAR 9600,8,1,ODD
:SYST:COMM:SERA:PAR?
String returned: "9600,8,1,ODD".
Syntax
:SYSTem:COMMunicate:SERA:BAUD <int1>
Parameters
int1 is the bit rate on the serial interface. Valid values are
9600,19200,38400,57600,115200. The default value is 57600.
Description
Sets the baud rate for serial port COM1. The other serial parameter settings are fixed
at 8 bits per char, 1 stop bit, no parity.
Query
Reads and returns the current settings of COM1 as explained above.
Example
:SYST:COMM:SERA:BAUD 115200
:SYST:COMM:SERA:BAUD?
Returns the following string:
"9600"
.
Syntax
:SYSTem:KEYBoard <PredefExp>
Parameters
PredefExp is one of the following predefined expressions:
USA|BELGium_fr|BELGium_nl|CANFr|CANEng
|DEN|FR|GER|ITA|JAP|LATAm_spa|LATAm_port |NL|NOR|PORTu-
gal|SPA|SWE|SWISs_fr |SWISs_ger|UK.
Default is USA.
Description
Selects the language for the external keyboard.
Note: The language setting defines the position and type of special characters.
Query
Reads and returns the current setting of the language of the external keyboard. The
string returned will contain one of the predefined expressions as explained above.
Example
:SYST:KEYB SWE
Sets the language for the external keyboard to 'Swedish'.
Syntax
:SYSTem:DATE <int1>,<int2>,<int3>
Parameters
intx are three integers.
The minimum value for int1 is 1998, the maximum is 2100. The default value is
1998.
The minimum value for int2 is 1, the maximum is 12. The default value is 1.
The minimum value for int3 is 1, the maximum is 31. The default value is 1.
Description
Sets the system date. This command uses the following format: jjjjmmdd where
jjjj stands for the four digits of the year (int1),
mm gives the two digits of the current month (int2) and,
dd represents the day of the current month (int3).
Query
Reads and returns the current system date in a string, using the format explained
above.

Table of Contents

Other manuals for WILLTEK 4403

Related product manuals