WILLTEK 4403 - Page 295

Appendix A SCPI Command Reference
SYSTem subsystem
WCDMA Options Version 6.20
273
:SYSTem:TIME
:SYSTem:VERSion?
:SYSTem:PRINTer
Example
:SYST:DATE 2001,7,6
Sets the system date to the 6th of July, 2001.
Syntax
:SYSTem:TIME <int1>,<int2>,<int3>
Parameters
intx are three integers.
The minimum value for int1 is 0, the maximum is 23. The default value is 0.
The minimum value for int2 is 0, the maximum is 59. The default value is 0.
The minimum value for int3 is 0, the maximum is 59. The default value is 0.
Description
Sets the system time. This command uses the following format: hhmmss where
hh stands for the two digits of the current hour, using a 24 hour time format (int1),
mm gives the two digits of the current minute (int2) and,
ss represents the seconds of the system time (int3).
Query
Reads and returns the current system time in a string, using the format explained
above.
Example
:SYST:TIME?
String returned: "12,56,05".
Syntax
:SYSTem:VERSion?
Parameters
There are no parameters.
Description
There is only a query form of this command available.
Query
Reads and returns the version number of the SCPI command system used on your
Willtek 4400. The command will return a string, containing one floating point real
number.
Example
:SYST:VERS?
String returned: "2001.7".
Syntax
:SYSTem:PRINTer <PredefExp>
Parameters
PredefExp is one of the following predefined expressions:
HP400|HP680|EPST|HPLJ|EPSP|EPSX
|EPSI|EPCI|EPS1|EPPX|EPC2|EPC4|EPC5|EPC6
|EPC8|EPC1|EPC3|BMPF|CANO.
Default is HP400.