WILLTEK 4403 - Page 325

Appendix A SCPI Command Reference
CONFigure subsystem
WCDMA Options Version 6.20
303
:CONFigure:WCDMa:NB:LEVel:DPCH
:CONFigure:WCDMa:NB:LEVel:PCCPch
:CONFigure:WCDMa:NB:LEVel:SCCPch
Description
This command sets the Primary CPICH power relative to Ior. This is an exception,
because this special code channel is always defined relative to Ior, regardless of what
is set with
CONF:WCDM:LEV:REL.
Query
The query form of this command will return the current setting of the Willtek 4400.
Example
:CONF:WCDMA:NB:LEV:CPIC -30
:CONF:WCDMA:NB:LEV:CPIC?
Value returned in this example: -30
.
Syntax
:CONFigure:WCDMa:NB:LEVel:DPCH <Real1>
Parameters
Real1 is a floating point real number. The minimum value is -35, the maximum
value is 0. The minimum resolution is 0.1. The default value is -5.0.
Description
This command sets the DPCH power relative to CPICH or Ior, depending on what is set
with CONF:WCDM:LEV:REL.
Query
The query form of this command will return the current setting of the Willtek 4400.
Example
:CONF:WCDMA:NB:LEV:DPCH -20
:CONF:WCDMA:NB:LEV:DPCH?
Value returned in this example:
-20.
Syntax
:CONFigure:WCDMa:NB:LEVel:PCCPch <Real1>
Parameters
Real1
is a floating point real number. The minimum value is -35, the maximum
value is 0. The minimum resolution is 0.1. The default value is -6.0.
Description
This command sets the PCCPCH power relative to CPICH or Ior, depending on what is
set with CONF:WCDM:LEV:REL.
Query
The query form of this command will return the current setting of the Willtek 4400.
Example
:CONF:WCDMA:NB:LEV:PCCP -10
:CONF:WCDMA:NB:LEV:PCCP?
Value returned in this example:
-10.
Syntax
:CONFigure:WCDMa:NB:LEVel:SCCPch <Real1>
Parameters
Real1
is a floating point real number. The minimum value is -35, the maximum
value is 0. The minimum resolution is 0.1. The default value is -3.0.
Description
This command sets the SCCPCH power relative to CPICH or Ior, dependent from what
is set with CONF:WCDM:LEV:REL
.
Query
The query form of this command will return the current setting of the Willtek 4400.
Example
:CONF:WCDMA:NB:LEV:SCCP -15
:CONF:WCDMA:NB:LEV:SCCP?
Value returned in this example: -15
.