WILLTEK 4403 - Page 328

Appendix A SCPI Command Reference
CONFigure subsystem
306 WCDMA Options Version 6.20
:CONFigure:WCDMA:NB:CELL:LAC
:CONFigure:WCDMA:NB:CELL:URA
:CONFigure:WCDMA:NB:CELL:CIDentity
:CONFigure:WCDMA:NB:CELL:PSC
Syntax
:CONFigure:WCDMA:NB:CELL:LAC <Int1>
Parameters
Int1
is an integer number. The minimum value is 0, the maximum value 65535.
The default value is 4660.
Description
This command sets the UE's LAC.
Query
The query form of this command will return the current setting of the Willtek 4400.
The string delivered will contain one integer number.
Example
:CONF:WCDMA:NB:CELL:LAC 0
:CONF:WCDMA:NB:CELL:LAC?
Value returned in this example: 0
.
Syntax
:CONFigure:WCDMA:NB:CELL:URA <Int1>
Parameters
Int1
is an integer number. The minimum value is 0, the maximum value 65535.
The default value is 29136.
Description
This command sets the UE's URA.
Query
The query form of this command will return the current setting of the Willtek 4400.
The string delivered will contain one integer number
.
Example
:CONF:WCDMA:NB:CELL:URA 30000
:CONF:WCDMA:NB:CELL:URA?
Value returned in this example: 30000
.
Syntax
:CONFigure:WCDMA:NB:CELL:CIDentity <Int1>
Parameters
Int1 is an integer number. The minimum value is 0, the maximum value
216494545. The default value is 216494544.
Description
This command sets the UE's cell identity.
Query
The query form of this command will return the current setting of the Willtek 4400.
The string delivered will contain one integer number
.
Example
:CONF:WCDMA:NB:CELL:CID 216494545
:CONF:WCDMA:NB:CELL:CID?
Value returned in this example: 216494545
.
Syntax
:CONFigure:WCDMA:NB:CELL:PSC <Int1>
Parameters
Int1
is an integer number. The minimum value is 0, the maximum value 511. The
default value is 0
.
Description
This command sets the NB primary scrambling code.