WILLTEK 4403 - Page 327

Appendix A SCPI Command Reference
CONFigure subsystem
WCDMA Options Version 6.20
305
:CONFigure:WCDMa:NB:LEVel:OCNS:STATe
:CONFigure:WCDMA:NB:CELL:MCC
:CONFigure:WCDMA:NB:CELL:MNC
Description
This command sets the OCNS power relative to CPICH or Ior, depending on what is set
with CONF:WCDM:LEV:REL.
Query
The query form of this command will return the current setting of the Willtek 4400.
Example
:CONF:WCDMA:NB:LEV:OCNS -18
:CONF:WCDMA:NB:LEV:OCNS?
Value returned in this example:
-18.
Syntax
:CONFigure:WCDMa:NB:LEVel:OCNS:STATe <PredefExp>
Parameters
PredefExp
is one of the following predefined expressions: ON|OFF. The default is
OFF
.
Description
This command sets the OCNS state on or off.
Query
The query form of this command returns the current setting for
PredefExp.
Example
:CONF:WCDMA:NB:LEV:OCNS:STAT OFF
:CONF:WCDMA:NB:LEV:OCNS:STAT?
Value returned in this example: OFF
.
Syntax
:CONFigure:WCDMA:NB:CELL:MCC <Int1>
Parameters
Int1
is an integer number. The minimum value is 0, the maximum value 999. The
default value is 1.
Description
This command sets the mobile country code (MCC).
Query
The query form of this command will return the current setting of the Willtek 4400.
The string delivered will contain one integer number.
Example
:CONF:WCDMA:NB:CELL:MCC 1
:CONF:WCDMA:NB:CELL:MCC?
Value returned in this example:
1.
Syntax
:CONFigure:WCDMA:NB:CELL:MNC <Int1>
Parameters
Int1
is an integer number. The minimum value is 0, the maximum value 999. The
default value is 1.
Description
This command sets the mobile network code (MNC).
Query
The query form of this command will return the current setting of the Willtek 4400.
The string delivered will contain one integer number.
Example
:CONF:WCDMA:NB:CELL:MNC 0
:CONF:WCDMA:NB:CELL:MNC?
Value returned in this example:
0.