WILLTEK 4403 - Page 341

Appendix A SCPI Command Reference
CALL subsystem
WCDMA Options Version 6.20
319
:CALL:WCDMa:NB:LOOPback:RELease
:CALL:WCDMa:UE:NUMBer
:CALL:WCDMa:UE:IMEIsv
:CALL:WCDMa:UE:IMSI
Example
:CALL:WCDM:NB:LOOP:CALL:WCDM:NB:LOOP?
Value returned in this example:
"ON".
Syntax
:CALL:WCDMa:NB:LOOPback:RELease
Parameters
There are no parameters.
Description
This command will stop loopback mode.
Query
There is no query form of this command available.
Example
:CALL:WCDM:NB:LOOP:REL
Syntax
:CALL:WCDMa:UE:NUMBer?
Parameters
There are no parameters.
Description
This query will deliver the number dialed on the mobile as a string. In case the call
was NB-originated, the string will be empty ("")
.
Query
There is only a query form of this command available. The query will deliver a string.
Example
:CALL:WCDM:UE:NUMB?
The string delivered is, for example: "5551234"
.
Syntax
:CALL:WCDMa:UE:IMEIsv?
Parameters
There are no parameters.
Description
This query will report the IMEI-(SV) of the UE.
Query
There is only a query form of this command available. The query will deliver a string.
Example
:CALL:WCDM:UE:IMEI?
The string delivered is, for example: "5553434251234"
.
Syntax
:CALL:WCDMa:UE:IMSI?
Parameters
There are no parameters.
Description
There is only a query form of this command available. The query will deliver a string.
Query
This query will deliver back a string containing the international mobile subscriber
identity.
Example
:CALL:WCDM:UE:IMSI?
The string delivered in this example could be: "001010123456789"
.