WILLTEK 4403 - Page 367

Appendix A SCPI Command Reference
MEASure subsystem
WCDMA Options Version 6.20
345
:MEASure:WCDMa[:CONTinuous]:RFRX:BER:RATIo
:MEASure:WCDMa[:CONTinuous]:RFRX:BLER:RATIo
:MEASure:WCDMa[:CONTinuous]:UEReport:STOP
:MEASure:WCDMa[:CONTinuous]:UEReport:ALL
Syntax
:MEASure:WCDMa[:CONTinuous]:RFRX:BER:RATIo
Parameters
There are no parameters.
Description
Starts a continuous BER measurement.
Query
The query form of this command will return a string containing the floating point
value with the BER result.
Example
:MEAS:WCDM:RFRX:BER?
Starts the measurement and returns the result, e.g. 3.1
.
Syntax
:MEASure:WCDMa[:CONTinuous]:RFRX:BLER:RATIo
Parameters
There are no parameters.
Description
Starts a continuous BLER measurement.
Query
The query form of this command will return a string containing the floating point
value with the BLER result.
Example
:MEAS:WCDM:RFRX:BLER?
Starts the measurement and returns the result, e.g. 3.1
.
Syntax
:MEASure:WCDMa[:CONTinuous]:UEReport:STOP
Parameters
There are no parameters.
Description
Stops a continuous measurement of the WCDMA UE Report.
Note: Stopping the test is not required since a test is automatically stopped when
you start a new test.
Query
The query form of this command is not available.
Example
:MEAS:WCDM:UER:PLOS
:MEAS:WCDM:UER:STOP
Configures, starts and stops a measurement.
Syntax
:MEASure:WCDMa[:CONTinuous]:UEReport:ALL
Parameters
There are no parameters.
Description
Starts a continuous measurement of all available UE Report tests.