WILLTEK 4403 - Page 371

Appendix A SCPI Command Reference
MEASure subsystem
WCDMA Options Version 6.20
349
:MEASure:WCDMa:ARRay:RFTX:NSTair:POWer
:MEASure:WCDMa:ARRay:RFTX:CPOWer
:MEASure:WCDMa:ARRay:RFTX:MODQuality:ALL
Description
This command starts a continuous measurement of the Staircase measurement. To
read out the latest measurement result, use the FETCh:WCDMa:RFTX:NSTair?
command.
Query
This query command will start the measurement and return a result value as soon as
the first measurement has been completed. The result delivered back will contain 512
floating-point numbers in dBm.
Example
:MEAS:WCDM:ARRay:RFTX:NST?
Syntax
:MEASure:WCDMa:ARRay:RFTX:NSTair:POWer
Parameters
There are no parameters.
Description
This command starts a continuous measurement of the staircase power measure-
ment. To read out the latest measurement result use the
FETCh:WCDMa:RFTX:NSTair:POWer? command.
Query
This query command will start the measurement and return a result value as soon as
the first measurement has been completed. The result delivered back will contain 7
floating point numbers in dBm.
Example
:MEAS:WCDM:ARRay:RFTX:NST:POW?
Syntax
:MEASure:WCDMa:ARRay:RFTX:CPOWer <Int1>
Parameters
Int1 is an integer. The minimum value for Int1
is 0, the maximum value is 100.
The default value is 0.
Description
Performs the measurement of the channel power as many times as specified.
Query
The query form of this command will perform the measurement the specified number
of times, and return the result (in dBm).
Example
:MEAS:WCDM:ARR:RFTX:CPOW? 10
Syntax
:MEASure:WCDMa:ARRay:RFTX:MODQuality:ALL <Int1>
Parameters
There are no parameters.
Description
Starts an array measurement of the most important RF TX Modulation Quality tests
as many times as specified.