WILLTEK 4403 - Page 390

Appendix A SCPI Command Reference
FETCh Subsystem
368 WCDMA Options Version 6.20
:FETCh:WCDMa:RFTX:MODQuality:PRMS?
:FETCh:WCDMa:RFTX:MODQuality:PPEAk?
:FETCh:WCDMa:RFTX:MODQuality:RHO?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
The command returns the result of a previous
:MEASure:WCDMa:CONT|ARR:RFTX:MODQuality:MPEAk measurement
command.
Example
:FETC:WCDM:RFTX:MODQ:MPEA?
Returns the measured magnitude peak vector error, e.g. 72.736
.
Syntax
:FETCh:WCDMa:RFTX:MODQuality:PRMS?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
The command returns the result of a previous
:MEASure:WCDMa:CONT|ARR:RFTX:MODQuality:PRMS measurement
command.
Example
:FETC:WCDM:RFTX:MODQ:PRMS?
Returns the measured RMS phase vector error, e.g. 6.738
.
Syntax
:FETCh:WCDMa:RFTX:MODQuality:PPEAk?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
The command returns the result of a previous
:MEASure:WCDMa:CONT|ARR:RFTX:MODQuality:PPEAk measurement
command
.
Example
:FETC:WCDM:RFTX:MODQ:PPEAk?
Returns the measured phase peak vector error, e.g. 27.512
.
Syntax
:FETCh:WCDMa:RFTX:MODQuality:RHO?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
The command returns the result of a previous
:MEASure:WCDMa:CONT|ARR:RFTX:MODQuality:RHO measurement
command.
Example
:FETC:WCDM:RFTX:MODQ:RHO?
Returns the modulation quality, e.g. 0.9989
.