WILLTEK 4403 - Page 393

Appendix A SCPI Command Reference
FETCh Subsystem
WCDMA Options Version 6.20
371
:FETCh:WCDMa:RFSPectrum:MSPectrum[:DATa]?
:FETCh:WCDMa:RFSPectrum:MSPectrum:OBW?
:FETCh:WCDMa:RFSPectrum:ACLR?
:FETCh:WCDMa:RFSPectrum:SEM[:DATa]?
Example
MEAS:WCDM:RFTX:COD:QPOW:AVG 10
:FETC:WCDM:RFTX:COD:QPOW?
Syntax
:FETCh:WCDMa:RFSPectrum:MSPectrum[:DATa]?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
The command returns the result of a previous
:MEASure:WCDMa:RFSPectrum:MSPectrum[:DATA|AVG] measure-
ment command.
Example
MEAS:WCDM:RFSP:MSP:AVG 10
:FETC:WCDM:RFSP:MSP?
Syntax
:FETCh:WCDMa:RFSPectrum:MSPectrum:OBW?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
The command returns the result of a previous
:MEASure:WCDMa:CONT|ARR:RFSPectrum:MSPectrum:OBW measure-
ment command.
Example
:FETC:WCDM:RFSP:MSP:OBW?
Syntax
:FETCh:WCDMa:RFSPectrum:ACLR?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
The query form of this command returns the latest result value of the
MEAS:WCDM:RFSP:ACLR measurement. The values delivered will contain at least
one array of floating-point numbers in dBm. The results for the adjacent channel
leakage power ratio at the following offsets: -10 MHz, -5 MHz, 0 MHz, +5 MHz,
+10 MHz
.
Example
:MEAS:WCDMA:ARR:RFSP:ACLR 5
:FETC:WCDM:RFSP:ACLR?
The Fetch command will return a data array, containing 5 times 5 floating point
real numbers.
Syntax
:FETCh:WCDMa:RFSPectrum:SEM[:DATa]?
Parameters
There are no parameters.