WILLTEK 4403 - Page 396

Appendix A SCPI Command Reference
FETCh Subsystem
374 WCDMA Options Version 6.20
:FETCh:WCDMa:UEReport:TXPOwer
:FETCh:WCDMa:UEReport:RTTDifference
:FETCh:WCDMa:UEReport:TRCH:BLER
Description
The query form is supported only, started by
MEASure:WCDMa[:CONT|ARRay]:UEReport:PLOSs
.
Query
Reports the path loss between Node B and UE, estimated by the UE.
Example
:FETC:WCDM:UER:PLOS?
Starts the measurement and returns the result, e.g.
85.
Syntax
:FETCh:WCDMa:UEReport:TXPOwer?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
Reports the UE transmit power started by
MEASure:WCDMa[:CONT|ARRay]:UEReport:TXPower.
Example
:FETC:WCDM:UER:TXPO?
Starts the measurement and returns the result, e.g. 66
.
Syntax
:FETCh:WCDMa:UEReport:RTTDifference?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
Reports the UE measured RX-Time-Difference between UL and DL signal started by
MEASure:WCDMa[:CONT|ARRay]:UEReport:RTTDifference.
Example
:FETC:WCDM:UER:RTTD?
Starts the measurement and returns the result, e.g. 956
.
Syntax
:FETCh:WCDMa:UEReport:TRCH:BLER?
Parameters
There are no parameters.
Description
Only the query form is supported.
Query
Reports the UE estimated BLER value for the Transport Channel started by
MEASure:WCDMa[:CONT|ARRay]:UEReport:TRCH:BLER.
Example
:FETC:WCDM:UER:TRCH:BLER?
Starts the measurement and returns the result, e.g. 0
.