WILLTEK 4403 - Page 464

Appendix A SCPI Command Reference
RFANalyser subsystem
442 WCDMA Options Version 6.20
:RFANalyser:WCDMa:SCODe
:RFANalyser:WCDMa:SRATe
:RFANalyser:WCDMa:SRATe
:RFANalyser:WCDMa:CCODe
Syntax
:RFANalyser:WCDMa:SCODe <string1>
Parameters
string1
is a string of up to 6 characters.
Description
This command sets the scrambling code used by the RF analyzer for WCDMA
measurements.
Query
The query form of this command will return the current setting of the Willtek 4400.
Example
:RFAN:WCDM:SCOD AABBCD
:RFAN:WCDM:SCOD?
Value returned in this example: "AABBCD"
.
Syntax
:RFANalyser:WCDMa:SRATe <PredefExp>
Parameters
PredefExp is one of the following predefined expressions:
SR60|SR15|SR30|SR120|SR240|SR480|SR960.
Default is SR60.
Description
This command will set the symbol rate of the 4400 Analyzer.
Query
The query form of this command returns the current setting. A query will return a
string, containing one of the predefined expressions explained above.
Example
:RFAN:WCDM:SRAT SR15
:RFAN:WCDM:SRAT?
Value returned in this example "SR15"
.
Syntax
:RFANalyser:WCDMa:SRATe <PredefExp>
Parameters
PredefExp is one of the following predefined expressions:
SR60|SR15|SR30|SR120|SR240|SR480|SR960.
Default is SR60.
Description
This command will set the symbol rate of the 4400 Analyzer.
Query
The query form of this command returns the current setting. A query will return a
string, containing one of the predefined expressions explained above.
Example
:RFAN:WCDM:SRAT SR15
:RFAN:WCDM:SRAT?
Value returned in this example "SR15"
.
Syntax
:RFANalyser:WCDMa:C0CODe <int1>
Parameters
int1 is an integer number. The minimum value is 1, the maximum value 256. The
initial default is 16.
Description
This command will set the channel code of the 4400 Analyzer.