Xerox Phaser 6125

Phaser 6125/6130 Color Laser Printer Service Manual 3-21
Error Messages and Codes
Image Processor Board Errors
Flash Memory Errors
Applicable Chain Links
■ Chain Link 016-500: Erase Flash Error
■ Chain Link 016-501: Write Flash Error
■ Chain Link 016-502: Verify Flash Error
■ Chain Link 016-737: Format Error
■ Chain Link 016-742: Invalid ID
■ Chain Link 016-743: Range Chk Error
■ Chain Link 016-744: Check Sum Error
■ Chain Link 016-745: Header Error
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL8.1.9 “Map 3 - LVPS, Drive Motors, I/P Board, AC
Power” on page 10-10
“Controller” on page 10-31
Troubleshooting Procedure
Step Actions and Questions Yes No
1 Check the download file
Was the correct file downloaded?
Go to step 2. Re-download
the correct file.
2 Check the connection between PC and
printer
Are the PC and the printer correctly
connected by USB or LAN?
Go to step 4. Go to step 3.
3 Disconnect and reconnect the USB or
network cable.
Does the error still occur when the
power is turned OFF and ON?
Go to step 4. Complete