Xerox Phaser 6125

Phaser 6125/6130 Color Laser Printer Service Manual 4-51
General Troubleshooting
DC Short
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ LVPS, PL9.1.4
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1.Turn the printer power Off.
2.Disconnect the power cord and wait for
one minute.
3.Reseat the LVPS connectors.
4.Turn the printer power On.
Does the printer operate normally?
Complete Go to step 2.
2 Check the Control Panel connection
Reconnect the Control Panel connector (P/
J220).
Does the Control Panel operate normally?
Complete Go to step 3.
3 Reseat the connectors on the MCU Board.
Does the printer operate normally?
Complete Replace the
LVPS Board
(page 8-55).