EasyManuals Logo
Home>Xerox>Printer>Phaser 6125

Xerox Phaser 6125 Service Manual

Xerox Phaser 6125
454 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #232 background imageLoading...
Page #232 background image
4-52 Phaser 6125/6130 Color Laser Printer Service Manual
General Troubleshooting
Operating System and Application Problems
Windows 2000, Windows XP, Windows Server Troubleshooting
Note
For Window XP, select Classic Look or the Windows XP procedures will
not match the following procedures. To select Classic Look, click Start,
Settings, Taskbar, and Start Menu. Select the Start Menu tab, and then
Classic Start Menu. Click OK.
This troubleshooting section assumes you have completed the following
tasks.
Loaded a Phaser printer PCL or PostScript printer driver.
Printed and kept a current copy of the Configuration page.
Verify Settings
1. Verify the settings on the Configuration page.
IP Address Source is set to: DHCP, Control Panel, BOOTP, or Auto
IP (depending on your network configuration).
Current IP Address is set correctly. (Note this address if it is
assigned by Auto IP, DHCP, or BOOTP.)
Subnet Mask is set correctly (if used).
Default Gateway is set correctly (if used).
LPR is enabled. Verify that the LPR and AppSocket settings are set
as desired.
Interpreters: Auto, PCL, or PostScript (depending on your driver).
2. Verify that the client is logged into the network and printing to the correct
print queue. The user should also have access to the Phaser printer
queue.
Verify Driver Installation
1. From the desktop, right-click My Network Places, and select Properties.
2. Right-click Local Area Connection and select Properties.
3. Click the General tab. View the list of installed network protocols to verify
that TCP/IP is installed. (For more information, contact your network
administrator.)
4. Click Install to install any components not listed, and then restart your
computer.
5. From the Start menu, select Start > Settings > Printers and Faxes.
6. Right-click the printer icon, and select Properties.
7. Click the Advanced tab. Verify that the correct printer driver is installed.

Table of Contents

Other manuals for Xerox Phaser 6125

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 6125 and is the answer not in the manual?

Xerox Phaser 6125 Specifications

General IconGeneral
ColorYes
Print technologyLaser
Maximum resolution2400 x 600 DPI
Time to first page (black, normal)17 s
Time to first page (color, normal)14 s
Print speed (black, normal quality, A4/US Letter)16 ppm
Print speed (color, normal quality, A4/US Letter)12 ppm
Internal memory64 MB
Sound power level (standby)25.7 dB
Sound pressure level (printing)51.6 dB
Total input capacity250 sheets
Total output capacity150 sheets
Media weight (tray 1)64 - 220 gsm
Paper tray media typesEnvelopes, Glossy paper, Labels, Plain paper
Non-ISO print media sizesLetter
Multi-Purpose Tray media weight64 - 164 g/m²
Power requirements240 V, 50/60 Hz
Networking features10/100BaseTX
Power consumption (active)280 W
Maximum duty cycle40000 pages per month
Sustainability certificatesENERGY STAR
Power consumption (standby)50 W
Power consumption (PowerSave)5 W
Storage temperature (T-T)0 - 35 °C
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)15 - 85 %
CertificationCE, UL 60950-1/CSA 60950-1-03, EMC 89/336/EEC, FCC 15 B, 73/23/EEC, 2002/95/EC
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)400 x 394 x 389 mm

Related product manuals