Xerox Phaser 6125

3-24 Phaser 6125/6130 Color Laser Printer Service Manual
Error Messages and Codes
Network/FontROM/MACaddress/RAM/Controller/NVRAM/ASIC Error
Failure occurred on the Image Processor Board.
Applicable Chain Links
■ Network Error Chainlinks:
■ 116-350 (Onboard Network Communication fail)
■ 116-351 (Onboard Network Ethernet BIST Parity/RAM R/W error)
■ 116-352 (Onboard Internal Loopback error)
■ 116-355 (Onboard Network Fatal error)
■ 018-319 (Onboard Network OS error)
■ 018-320 (Onboard Network VxWorks error)
■ Font ROM Error Chain Link 116-310: (Main Font ROM checksum error)
■ MACaddress Error Chain Link 116-314: (MACaddress checksum error)
■ RAM Error Chain Link 116-315: (RAM W/R failure at initialization)
■ Controller Error Chain Links:
■ 116-317: (Program ROM checksum error)
■ 116-324: (CPU Illegal Exception)
■ 116-327: (Instruction Cache checksum error)
■ 116-328: (Data Cache checksum error)
■ NVRAM Error Chain Links:
■ 116-323: (NVRAM1 W/R Check failure)
■ 116-326: (NVRAM2 W/R Check failure)
■ 116-390: (NVRAM1 Size and ID Check failure)
■ ASIC Error Chain Link 116-343
Initial Actions
■ Cycle printer power.
■ If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Image Processor Board, PL8.1.9 “Map 3 - LVPS, Drive Motors, I/P Board, AC
Power” on page 10-10
“Controller” on page 10-31