Xerox Phaser 6125

Phaser 6125/6130 Color Laser Printer Service Manual 3-59
Error Messages and Codes
Load Tray
Size mismatch detected at Tray.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
Image Processor Board (PL8.1.9)
MCU Board (PL8.2.13)
■ “Map 1 - Transfer Unit, Control Panel,
Imaging Unit, Dispenser, Fuser” on
page 10-8
■ “Map 4 - Toner Dispenser Motors, HVPS,
MCU” on page 10-11
■ “Xerographic” on page 10-24
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Check the paper size
Does the paper size being used meet
the specification?
Go to step 3. Use paper that
meets the
specifications,
then go to step
2.
2 Does the error still occur when
printing?
Go to step 3. Complete
3 Check the print data, paper (print
media), and paper setting for the
following, and correct the incorrect
items:
■ Is the paper suitable for the print
data?
■ Does the paper setting match the
paper?
■ Is the paper setting suitable for the
print data?
Does the error still occur when
printing?
Go to step 4. Complete
4 Reload the paper tray with the correct
paper and return the tray to the printer.
Does the error still occur when
printing?
Go to step 5. Complete
5 Replace the MCU Board (page 8-59).
Does the error still occur when
printing?
Replace the
Image
Processor Board
(page 8-60).
Complete