8-28 Phaser 6125/6130 Color Laser Printer Service Manual
Service Parts Disassembly
Manual Feed No Paper Sensor
To help prevent damage to the Transfer Belt while removing the Manual
Feed No Paper Sensor, lay a sheet of paper on the Transfer Belt.
1. Remove the Tray.
2. Open the Front Cover.
Do not expose the drums on the Imaging Unit to light for more than 5
minutes. Cover the drums to avoid damage.
3. Remove the Imaging Unit (page 8-8).
In the next step, lift the bracket gently to avoid damaging the sensor
harness wires.
4. Remove the two screws (silver, tap, 8mm) that attach the sensor bracket
to the printer, and carefully lift the bracket from the printer.
To Next Page
Loading...
