Xerox Phaser 6125

Phaser 6125/6130 Color Laser Printer Service Manual 4-21
General Troubleshooting
Regi Sensor
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Perform the Regi Sensor test: Engine Diag > Sensor Test > Regi
Sensor.
4. Operate the actuator while checking the information on the Control Panel
display. The Low and High values change from 0 up 99.
5. Press the Cancel button to stop the Regi Sensor test.
Regi Sensor
L-0
Regi Sensor
H-0
Control Panel
Normal
s6130-185
Actuator