2.9 Change the Drive Enclosure Type
60 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
Note:
The number of screws are different for different models.
• 100-192-121-007: 4 screws
• 100-192-121-008: 6 screws
A - M4 × 8 pan head screws B - Base
Figure 2.54 Install the Base on the Stay Brackets
3. Use the included bolts to install the UL Type 1 base to the drive.
Tighten the bolts to a correct tightening torque:
• M6 × 16 upset bolts 3.92 N∙m to 4.90 N∙m (34.70 lbf∙in to 43.37 lbf∙in)
• M8 × 16 hex bolts: 8.83 N∙m to 10.79 N∙m (78.15 lbf∙in to 95.49 lbf∙in)
A - M6 × 16 upset head bolts
B - M8 × 16 hex bolts
C - M8 plain washers
D - Base
Figure 2.55 Safety the Base
4. Use the included screws to install the UL Type 1 conduit bracket to the base.
Tighten the screws to a correct tightening torque:
• 0.98 N∙m to 1.33 N∙m (8.67 lbf∙in to 11.77 lbf∙in)
To Next Page
Loading...
