YASKAWA CR700

11.6 E: Motor Parameters
636 YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual
4 : VT, 50Hz, 65% Vmid reduction
This derated torque characteristics pattern is used for torque loads proportional to three times the rotation speed,
such as is the case with fans and pumps.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
2003 - 2018, 4002 - 4009 2025 - 2180, 4015 - 4091 2215 - 2415, 4112 - 4605
5 : VT, 50Hz, 50% Vmid reduction
This derated torque characteristics pattern is used for torque loads proportional to two times the rotation speed,
such as is the case with fans and pumps.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
2003 - 2018, 4002 - 4009 2025 - 2180, 4015 - 4091 2215 - 2415, 4112 - 4605
6 : VT, 60Hz, 65% Vmid reduction
This derated torque characteristics pattern is used for torque loads proportional to three times the rotation speed,
such as is the case with fans and pumps.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
2003 - 2018, 4002 - 4009 2025 - 2180, 4015 - 4091 2215 - 2415, 4112 - 4605
7 : VT, 60Hz, 50% Vmid reduction
This derated torque characteristics pattern is used for torque loads proportional to two times the rotation speed,
such as is the case with fans and pumps.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.