Parameter Details
11
11.6 E: Motor Parameters
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 637
2003 - 2018, 4002 - 4009 2025 - 2180, 4015 - 4091 2215 - 2415, 4112 - 4605
8 : High Trq, 50Hz, 25% Vmin boost
This pattern is used when moderate torque is required during startup.
Select this pattern only in the following circumstances.
• Wiring distance between the drive and motor is at least 150 m.
• An AC reactor is connected to the drive output.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
2003 - 2018, 4002 - 4009 2025 - 2180, 4015 - 4091 2215 - 2415, 4112 - 4605
9 : High Trq, 50Hz, 65% Vmin boost
This pattern is used when strong torque is required during startup.
Select this pattern only in the following circumstances.
• Wiring distance between the drive and motor is at least 150 m.
• An AC reactor is connected to the drive output.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
2003 - 2018, 4002 - 4009 2025 - 2180, 4015 - 4091 2215 - 2415, 4112 - 4605
A : High Trq, 60Hz, 25% Vmin boost
This pattern is used when moderate torque is required during startup.
Select this pattern only in the following circumstances.
• Wiring distance between the drive and motor is at least 150 m.
• An AC reactor is connected to the drive output.
Note:
The voltage values in the figure represent those when using 200 V class drives. Double the values for 400 V class drives.
To Next Page
Loading...
