Parameter Details
11
11.8 H: Terminal Functions
YASKAWA SIEPC71061723A YASKAWA AC Drive CR700 Technical Manual 689
Operates the function assigned to H1-05 [Terminal S5 Function Selection] and the function assigned to H1-25
simultaneously if the MFDI terminal S5 is turned ON.
When you set F, the function will be disabled.
■ H1-26: Terminal S6 Function Select 2
No.
(Hex.)
Name Description
Default
(Range)
H1-26
(0B75)
Terminal S6 Function
Select 2
Sets the second function for MFDI terminal S6.
F
(0 - 1FF)
Operates the function assigned to H1-06 [Terminal S6 Function Selection] and the function assigned to H1-26
simultaneously if the MFDI terminal S6 is turned ON.
When you set F, the function will be disabled.
■ H1-27: Terminal S7 Function Select 2
No.
(Hex.)
Name Description
Default
(Range)
H1-27
(0B76)
Terminal S7 Function
Select 2
Sets the second function for MFDI terminal S7.
F
(0 - 1FF)
Operates the function assigned to H1-07 [Terminal S7 Function Selection] and the function assigned to H1-27
simultaneously if the MFDI terminal S7 is turned ON.
When you set F, the function will be disabled.
■ H1-28: Terminal S8 Function Select 2
No.
(Hex.)
Name Description
Default
(Range)
H1-28
(0B77)
Terminal S8 Function
Select 2
Sets the second function for MFDI terminal S8.
F
(0 - 1FF)
Operates the function set to H1-08 [Terminal S8 Function Selection] and the function set to H1-28 simultaneously
if MFDI terminal S8 is turned ON.
When you set F, the function will be disabled.
■ H1-29: Terminal S9 Function Select 2
No.
(Hex.)
Name Description
Default
(Range)
H1-29
(0B78)
Terminal S9 Function
Select 2
Sets the second function for MFDI terminal S9.
F
(0 - 1FF)
Operates the function assigned to H1-09 [Terminal S9 Function Selection] and the function assigned to H1-29
simultaneously if the MFDI terminal S9 is turned ON.
When you set F, the function will be disabled.
■ H1-30: Terminal S10 Function Select 2
No.
(Hex.)
Name Description
Default
(Range)
H1-30
(0B79)
Terminal S10 Function
Select 2
Sets the second function for MFDI terminal S10.
F
(0 - 1FF)
Operates the function assigned to H1-10 [Terminal S10 Function Selection] and the function assigned to H1-30
simultaneously if the MFDI terminal S10 is turned ON.
When you set F, the function will be disabled.
■ MEMOBUS/Modbus Multi-Function Digital Input 1 to 3 Functions Selection
The function for the MFDI can be assigned to MEMOBUS register bit 0 to 2 of [15C0 (Hex.)]. Select the function
with H1-40 to H1-42 [Mbus Reg 15C0h bit0 to bit 2 Input Func].
To Next Page
Loading...
