YASKAWA CR700 - Page 830

EZZ023534<1>
16 / 21
No. (Hex.) Name Description
Default Setting
(Range)
Ref.
S9-20
(1A9D)
Expert
Wire
Length@Rolling
Up
V/f CL-V/f OLV CLV AOLV
When S9-14 = 1 or 2 [Wire Length Detection Method =
External Input] is enabled.
Sets the wire length in meters from the center of the lifting
and lowering shaft drum to the center of gravity position of
the wire tip when the wire is hoisted to the hoisting limit
(forward travel limit activation) with no cargo suspended.
1.0 m
(1.0 to 50.0 m)
12
S9-28
(1AA5)
Expert
Correction
value1 of Wire
Length
V/f CL-V/f OLV CLV AOLV
Sets the wire length correction value in meters for the center
of gravity position of the wire tip. The correction value is the
total value of the correction values that are enabled by multi-
function digital input out of the values of Correction value1
to 3 of Wire Length.
0.0 m
(-50.0 to 50.0 m)
14
S9-29
(1AA6)
Expert
Correction
value2 of Wire
Length
V/f CL-V/f OLV CLV AOLV
Sets the wire length correction value in meters for the center
of gravity position of the wire tip. The correction value is the
total value of the correction values that are enabled by multi-
function digital input out of the values of Correction value1
to 3 of Wire Length.
0.0 m
(-50.0 to 50.0 m)
14
S9-30
(1AA7)
Expert
Correction
value3 of Wire
Length
V/f CL-V/f OLV CLV AOLV
Sets the wire length correction value in meters for the center
of gravity position of the wire tip. The correction value is the
total value of the correction values that are enabled by multi-
function digital input out of the values of Correction value1
to 3 of Wire Length.
0.0 m
(-50.0 to 50.0 m)
14
<1> *1: The setting range is different for different PRG number.
PRG:01017 or later: 1.0 to 300.0 m, earlier than PRG:01017: 1.0 to 50.0 m