YASKAWA CR700

EZZ023534<1>
19 / 21
◆ Multi-Function Analog Inputs (H3-02/H3-06/H3-10)
H3 Multi-Function Analog Inputs
Setting
Value
Function
Description Ref.
28 Wire Length
V/f CL-V/f OLV CLV AOLV
Inputs the wire length to the drive as analog input. This input is used when S9-14 =
1.
100% = S9-19 [Wire Length]
0% = S9-20 [Wire Length@Rolling Up]
10
◆
MEMOBUS Inputs
MEMOBUS Inputs
Register
No.
(Hex.)
Function Range Resolution Unit Description Ref.
00F4
Wire
Length
0.0 to
100.0
0.1 %
V/f CL-V/f OLV CLV AOLV
Inputs the wire length to the drive as analog input. This input is
used when S9-14 = 2.
100% = S9-19 [Wire Length]
0% = S9-20 [Wire Length@Rolling Up]
10
◆
Monitors
No.
(Hex.)
Name Description MFAO Signal Level Unit Ref.
U9: Dedicated Application Monitors
U9-01
(0820)
Expert
Hook Position
(NumR)
V/f CL-V/f OLV CLV AOLV
Displays the current position of the hook as the
number of motor rotations. The number of motor
rotations is always the Forward Limit Position
(forward travel limit = 0 revolutions).
No signal output
available
1
rotation
5
U9-02
(0821)
Expert
Hook Position
(%)
V/f CL-V/f OLV CLV AOLV
Displays the current position of the hook (U9-01) as
a percentage.
The reference position is set with S9-05. The display
is limited between 0% and 100%.
10 V: Hook
RangeLim Number
of Rotation
0.1% 5
U9-06
(0825)
Expert
Wire Length
V/f CL-V/f OLV CLV AOLV
The monitor value of the wire length.
The wire length after wire length correction is
output.
10 V: Wire Length
(S9-19)
0.1 m 14