YASKAWA NX100 Instructions

8.19 Display Setting Function
8-113
8.19.2 Operation Button Size Setting
NX100 enables changing the size of operation buttons.
The button size in the main menu area, menu area, and instruction list can be respectively
selected from three sizes.
 Applicable Range for the Button Size Change
Changing the button size is allowed in the main menu, menu (pull-down menu), and instruc-
tion list indicated in the following figure:
 Settable Button Size
The following three sizes of buttons are available in setting the size of each operation button;
the font style of the character string on buttons can also be specified.
Button Size Font Style
1Small
Regular
Bold
2 Regular
Regular
Bold
3 Large
Regular
Bold
Short CutMain Menu
SETUP
CF
FD/CF
DOUT
MOVE
END
JOB
ARC WELDING
B001
VARIABLE
In Out
IN/OUT
ROBOT
SYSTEM INFO
DISPLAY SETUP
A
a
JOB CONTENT: MASTER
JOB NAME: 1
CONTROL GROUP: R1
0000
0001
0002
0003
0004
0005
0006
0007
0008
0009
0010
0011
0012
JOB
EDIT DISPLAY UTILITY
=>
NOP
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
MOVJ VJ=0.78
STEP NO: 000
TOOL:
Turn on servo power
Menu area
(pull-down menu)
ARITH
CONTROL
DEVICE
MOTION
IN/OUT
SHIFT
OTHER
SAME
PRIOR
Instruction list
Main menu area

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C