YOKOGAWA UP55A - Page 321

11-14
IM 05P02C41-01EN
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
AL1toAL8 Alarm-1 to -8 type EASY See the table below.
ALRM
VT1toVT8
PV velocity alarm time
setpoint 1 to 8
EASY
00.01 to 99.59
(minute.second)
Note1: The initial values of the parmeters AL1 to AL8 and VT1 to VT8 are "4".
Only AL1 to AL4 and VT1 to VT4 are displayed. The number of alarms can be changed using
the parameter ALNO.
Note2: In Cascade control, the LP2 lamp is lit while the Loop-2 parameter is displayed.
11.1SettingAlarmType