YOKOGAWA UP55A - Selecting by Operation Mode Parameter; Selecting Start-Of-Program Pattern Number; Selecting by MODE Key

6-49
IM 05P02C41-01EN
Monitoring and Control of Regular Operations
6
6.7 SelectingStart-of-programPatternNumber
SelectingbyMODEKey
SettingDisplay
Every time you press the MODE key, the operation
mode is switched.
Display SST (start-of-program segment number),
and press the SET/ENTER key.
SelectingbyOperationModeParameter
SettingDisplay
Parameter Setting Display
Operation Display > PARAMETER key for 3 seconds (to
[MODE] Menu Display) > SET/ENTER key (The setting
parameter is displayed.) > Downarrow key (The setting
parameter is displayed.)
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
SST
Start-of-program
segment number
EASY 1 to 99 MODE