YOKOGAWA UP55A - Setting Alarm Action According to Operation Mode

11-21
IM 05P02C41-01EN
Alarm Functions
11
11.6 SettingAlarmActionAccordingtoOperation
Mode
Description
The alarm action usually functions regardless of operation modes.
Setting the alarm mode allows the alarm action to be disabled in RESET or MAN mode.
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
AMD Alarm mode STD
0: Always active
1: Not active in RESET mode
2: Not active in RESET or MAN
mode
ALRM
Note1: In Cascade control, the LP2 lamp is lit while the Loop-2 parameter is displayed.