YOKOGAWA UP55A - Registering and Initializing User Default Values; Registering as User Setting (Default) Values; Initializing To User Setting (Default) Values

14-2
IM 05P02C41-01EN
14.2 RegisteringandInitializingUserDefaultValues
14.2.1 RegisteringasUserSetting(Default)Values
Description
The user default values can be registered as parameter default values.
The ladder program, the program pattern, and parameter "SEG.T" can not be registered
as user default values.
Use the LL50A Parameter Setting Software to register user setting (default) values.
 CAUTION
Before registering the user default value, make sure that the user setting value is set to
the parameter.
14.2.2 InitializingtoUserSetting(Default)Values
Description
Parametersettingscanbeinitializedtotheusersetting(default)values.
Theladderprogram,theprogrampattern,andparameter"SEG.T"arenotinitializedto
the factory default.
Use the LL50A Parameter Setting Software to execute it.
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
U.DEF
Initializationtouser
default value
PRO
12345:Initialization,
automatically returned to "0"
afterinitialization.
INIT