YOKOGAWA UP55A - Setting Message Function; Switching Guide Display Language

13-13
IM 05P02C41-01EN
Display, Key, and Security Functions
13.1.10 SettingMessageFunction
Description
Using the message function and turning the contact input on/off, the message registered
beforehand can be displayed on PV display by interrupt.
The message is registered using LL50A Parameter Setting Software.
The messages are limited to 20 alphanumeric characters. A maximum of four messages
can be registered.
If a number of messages occur simultaneously, the priority is as follows:
(high) MG1>MG2>MG3>MG4 (low)
► Messageregistration:LL50AParameterSettingSoftwareUser’sManual
► Registration of contact input: 12.1.1 Setting Contact Input Function
► Registration symbols: 3.3 List of Display Symbols
When the contact input is
turned on, the scrolling
message registered
beforehand is displayed
on PV Display.
Operation Display
13.1.11 SwitchingGuideDisplayLanguage
Description
The guide display language that appears when the parameter or the menu is displayed
can be switched.
SettingDetails
Parameter
symbol
Name
Display
level
Settingrange Menusymbol
LANG
Guide display
language
EASY
ENG: English
FRA: French
GER: German
SPA: Spanish
SYS
13
13.1SettingDisplayFunctions