YOKOGAWA UP55A User Manual

4-7
IM 05P02C41-01EN
Basic Operation
4
4.2HowtoSetParameters
HowtoSetParameterSetpoint
NumericValueSetting
1
. Display the Parameter Setting Display.
2
. Press the SET/ENTER key to move to the
setting mode (the setpoint blinks).
3
. Press the Left arrow key to move one digit to
the left.(Press the Right arrow key to move one
digit to the right.)
4
. Press the Up or Down arrow key to change the
setpoint. Press the Up arrow key when 9 is
displayed to move one digit to the left. Press
the Down arrow key when 0 is displayed to
move one digit to the right.
5
. Press the SET/ENTER key to register the
setpoint.
SelectionDataSetting
1
. Display the Parameter Setting Display.
2
. Press the SET/ENTER key to move to the
setting mode (the setpoint blinks).
3
. Press the Up arrow key to change the setpoint
(press the Down arrow key to change the
setpoint).
4
. Press the SET/ENTER key to register the
setpoint.

YOKOGAWA UP55A Specifications

General

Brand	YOKOGAWA
Model	UP55A
Category	Controller
Language	English