Zte ZXR10 GER - Page 114

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
92 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 92 E1 CONFIGURATION COMMAND
Command
Format
Command
Mode
Command Function
controller
ce3_<interface-
name>
controller
enters E1 controller
configuration mode
Result: This enables to enter into E3 configuration mode.
3. To configure channelized mode of E3 interface, use
Channelized e3 <interface-name> command in controller
configuration mode, as shown in
Table 93.
TABLE 93 CHANNELIZED COMMAND
Command
Format
Command
Mode
Command Function
Channelized
e3
<interface-
name>
controller
This configures channelized
mode
Result: This sets E3 interface into channelized mode.
4. To configure frame mode of an E3 interface, use framing
{unframe|frame} command in controller configuration
mode, as shown in
Table 94.
TABLE 94 FRAMING COMMAND WINDOW
Command Format
Command
Mode
Command Function
framing
{unframe|frame}
global config
This configures framing
mode of E3 interface.
When non-framing mode
is configured, system
automatically create a
sub-channel with channel
ID 1
Result: This sets framing mode of an E1 interface.
5. To configure an ip address for E3 interface use ip address
<ip-address> <net-mask> [<broadcast-address>]
command in interface configuration mode, as shown in
Table
95.
TABLE 95 IP ADDRESS COMMAND
Command Format
Command
Mode
Command Function
ip address <ip-
address> <net-
mask>
[<broadcast-
address>]
Interface
This configures IP
address of an interface