ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
178 Confidential and Proprietary Information of ZTE CORPORATION
7. To enable the poison reverse mechanism, use the ip poison-
reverse command in RIP interface configuration mode as
shown in
Table 217.To disable the split horizon mechanism,
use the no form of this command.
TABLE 217 IP POISON REVERSE COMMAND WINDOW
Command
Format
Command
Mode
Command Function
ip poison-
reverse
RIP Interface
Config
This enables redistribution of
other protocols in RIP
routing domain.
Result: This enables redistribution of other protocols in RIP
routing domain.
8. To redistribute a route from another routing domain to rip
routing domain use command redistribute <protocol>
[metric <value>] [route-map <map-tag>] in RIP
configuration mode as shown in
Table 218 .To disable this,
use the no form of this command.
TABLE 218 REDISTRIBUTE COMMAND WINDOW
Command
Format
Command
Mode
Command Function
redistribute
<protocol>
[metric
<value>]
[route-map
<map-tag>]
RIP Config
This helps to configure metric
values for other routing protocols.
<protocol> refers to both EGP and IGP protocols.
<value> ranges from <0-16>.
<map-tag> refers to a tag values through route recognize.
Result: This enables redistribution of other protocols in RIP
routing domain.
9. To set default metric values for RIP, use this form of the
default-metric command in RIP router configuration mode
as shown in
Table 219 . To return to the default state, use
the no form of this command.
TABLE 219 DEFAULT METRIC COMMAND WINDOW
Command
Format
Command
Mode
Command Function
default-metric
<number>
RIP Interface
Config
This enables the poison
reverse mechanism
<number> ranges from <1-16>.
Default-metric command is used in conjunction with the
redistribute router configuration command to cause the
To Next Page
Loading...
