Chapter 13 RIP Configuration
Confidential and Proprietary Information of ZTE CORPORATION 181
TABLE 224 SHOW IP RIP DATABASE COMMAND WINDOW
Command
Format
Command
Mode
Command Function
show ip rip
database
Exec This displays the information
about all neighbors
configured by the user
Result: This show all the database information about RIP.
5. To display all RIP interface information configured by the
user, use show ip rip networks in Exec mode as shown in
Table 225.
TABLE 225 IP RIP NETWORK COMMAND WINDOW
Command
Format
Command
Mode
Command Function
show ip rip
networks
Exec This displays the information
about all neighbors
configured by the user
Result: This shows all RIP interface information configured
by the user.
ZXR10 GER also provides the debug command to debug RIP and
trace related information.
1. To trace the basic rip sending and receiving packet, use
debug ip rip command in Exec mode as shown in
Table 226.
TABLE 226 DEBUG IP RIP COMMAND WINDOW
Command
Format
Command
Mode
Command Function
debug ip rip Exec This traces the basic packet
sending/receiving process of
RIP
Result: This traces RIP sending/ receiving packet.
2. To Traces the change process of the RIP routing table, use
debug ip rip database command in Exec mode as shown in
Table 227.
TABLE 227 DEBUG IP RIP DATABASE COMMAND WINDOW
Command
Format
Command
Mode
Command Function
debug ip rip
database
Exec Traces the change process
of the RIP routing table
Result: This traces the change process of the RIP routing
table.
Debugging