EasyManua.ls Logo

Zte ZXR10 GER - Page 276

Zte ZXR10 GER
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
254 Confidential and Proprietary Information of ZTE CORPORATION
1. To display the configuration information about the BGP
module, use show ip bgp protocol command in privileged
mode as shown in
Table 300.
TABLE 300 SHOW IP BGP PROTOCOL COMMAND
Result: This displays the configuration information about the
BGP protocol.
2. To view BGP adjacency and display the current neighbor
status, use show ip bgp neighbor [<ip-address>| {in|out}
<ip-address>] command in privileged mode as shown in
Table 301.
TABLE 301 SHOW IP BGP NEIGHBOR COMMAND
Result: This displays the BGP adjacency and display the
current neighbor status.
3. To display entries in the BGP routing table, use show ip bgp
route [network <ip-address> [mask <net-mask>]]
command in privileged mode as shown in
Table 302.
TABLE 302 SHOW IP BGP ROUTE COMMAND
Result: This displays the entries in the BGP routing table.
4. To display the status of all BGP neighbor connections, use
show ip bgp summary command in privileged mode as
shown in
Table 303.
Steps
Command
Format
Command
Mode
Command Function
show ip bgp
protocol
privileged
This displays the
configuration information
about the BGP module
Command
Format
Command
Mode
Command Function
show ip bgp
neighbor [<ip-
address>|
{in|out} <ip-
address>]
privileged
This displays the BGP
adjacency and display the
current neighbor status
Command
Format
Command
Mode
Command Function
show ip bgp
route [network
<ip-address>
[mask <net-
mask>]]
privileged
This displays the entries in
the BGP routing table

Table of Contents

Related product manuals