ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
260 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 307 MATCH IP ADDRESS
Result: This performs policy routing on the data packet that
matches the access table.
4. To route the data packet to the specified next hop, use set
ip next-hop command in route mapping configuration mode,
as shown in
Table 308.
TABLE 308 IP NEXT-HOP COMMAND
Result: This enables to route the data packet to the
specified next hop
5. To route the data packet to the specified interface, use set
interface command in route mapping configuration mode,
as shown in
Table 309.
TABLE 309 SET INTERFACE COMMAND
Result: This enables to route the data packet to the
specified interface
6. To define the default route when destination is not obtained,
use set ip default next-hop command in route mapping
configuration mode, as shown in
Table 310.
TABLE 310 SET IP DEFAULT NEXT HOP COMMAND
Command
Format
Command
Mode
Command Function
match ip
address
route
mapping
configuration
This performs policy
routing on the data packet
that matches the access
table
Command
Format
Command
Mode
Command Function
ip next-hop
route
mapping
configuration
This enables to route the
data packet to the specified
next hop
Command
Format
Command
Mode
Command Function
set interface
route
mapping
configuration
This enables to route the
data packet to the specified
interface
Command
Format
Command
Mode
Command Function
set ip default
next-hop
route
mapping
configuration
This defines the default
route when destination is
not obtained