Zte ZXR10 GER - Page 307

Chapter 19 MPLS Configuration
Confidential and Proprietary Information of ZTE CORPORATION 285
TABLE 333 SHOW MPLS LDP BINDINGS COMMAND
Command
Format
Command
Mode
Command Function
show mpls ldp
bindings
Privileged
This displays the learned LDP
label binding
Result: This displays the learned LDP label binding.
ZXR10 #show mpls ldp bindings
10.10.1.1/255.255.255.255
local binding: label: 17
remote binding: lsr: 10.10.3.3:0, label: 18
remote binding: lsr: 10.10.1.1:0, label: imp-
null(inuse)
10.10.2.2/255.255.255.255
local binding: label: imp-null
remote binding: lsr: 10.10.3.3:0, label: 17
remote binding: lsr: 10.10.1.1:0, label: 18
10.10.3.3/255.255.255.255
local binding: label: 16
remote binding: lsr: 10.10.3.3:0, label: imp-
null(inuse)
remote binding: lsr: 10.10.1.1:0, label: 17
10.10.12.0/255.255.255.0
local binding: label: imp-null
remote binding: lsr: 10.10.3.3:0, label: 16
remote binding: lsr: 10.10.1.1:0, label: imp-
null
10.10.23.0/255.255.255.0
local binding: label: imp-null
remote binding: lsr: 10.10.3.3:0, label: imp-
null
remote binding: lsr: 10.10.1.1:0, label: 16:
ZXR10 #
6. For complicated troubleshooting, following debug commands
may be used.
Command Format
Command
Mode
Command Function
debug mpls ldp
transport
{connections|events}
Privileged
Monitors information
discovered by LDP.
debug mpls ldp
session {io|state-
machine}
Privileged
Monitors LDP session
activities.
debug mpls ldp
messages
Privileged
Monitors messages
from/to an LDP neighbor.