EasyManua.ls Logo

Zte ZXR10 GER - Page 87

Zte ZXR10 GER
412 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 System Management
Confidential and Proprietary Information of ZTE CORPORATION 65
TABLE 55 DELETE COMMAND WINDOW
Command Format
Command
Mode
Command Function
delete
<directory&filename>
Exec
This deletes a file under a
designated directory of the
current equipment
<directory&filename> parameter is from 1-80 characters.
Result: A Prompt appears, Are you sure to delete files
with options [Yes/No].
4. To enter into specific directory, use cd <directory-name>
command, as shown in
Table 56.
TABLE 56 CD COMMAND WINDOW
Command
Format
Command
Mode
Command Function
cd
<directory-
name>
Exec
This command enable to Enter into a
file directory of a designated file
equipment or the current equipment
<directory-name> represents 1-80 characters.
Result: This command sets prompt into designated directory
like flash: / [directory name].
5. To return back to the root directory, use cd .. command, as
shown in
Table 57.
TABLE 57 CD .. COMMAND WINDOW
Command
Format
Command
Mode
Command Function
cd .. Exec
This command makes return to
root directory
Result: This permits to go back to root directory.
Important! This is to notice down that there is one space
after writing Cd and then “..”.
6. To make directory in flash, use mkdir <directory-name>
command, as shown in
Table 58.
TABLE 58 MK DIR COMMAND WINDOW
Command
Format
Command
Mode
Command Function
mkdir
<directory-
name>
Exec
This creates new directory in
flash
<directory-name> represents 1-32 characters.
Result: This makes a new directory in flash.

Table of Contents

Related product manuals